GP3000H-CBLSD-5M GP3000H soft belt joint type straight cable

Adapter for EX module (5 / set)Used for surface protection of man-machine interface from oil and chemical pollution (5 / set).One end is a loose wire, which is used to carry out RS-485 connection between the host and LT.5 / setsUsed in a variety of host and man-machine interface for RS-422 connectionThe man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port GP3000H-CBLSD-5M GP3000H-CBLSD-5M LT4000M (module type DIO), NPN output, DC24V (host).The installation of accessories, adjust the size of the GP-411xT panel with the same size of the GP-410xG/W, easy to replace.15 inches, replaced by a host of backlight (1).Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters) GP3000H-CBLSD-5M. Used to install the human machine interface to the fixed panel (2 / cover).The main controller is connected to the man-machine interface for MPI communicationExpansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communicationReplaceable anti fouling film for protecting screen protective film (5 sheets / cover).15 inches, GP installed to the hard panel to provide dust and moisture proof function GP3000H-CBLSD-5M. Suitable for LT4000M/GP4000M series modules, 3.5 inch.Connector for connecting DC power cord. (linear, 5 / set)LT4000M (module type analog), PNP output, DC24V (host).5 / setsStop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces).Adapter for EX module (5 / set)Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block.Useed to convert RGB to DVI-AThe man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port GP3000H-CBLSD-5M. Length: 3 meters7.5 inches, GP installed to the hard panel to provide dust and moisture proof function.7.55 inches /3 GP3000H-CBLSD-5M. 8 inches /5.7 inches, used to connect the power cord (5 / sets).A veneer, for the GP4000 series back loading models of full flush (white, 1)