Proface
Home >> Products >> Proface >> man-machine interface accessories >> GP2000H-AP422 RS-422 GP2000H adapter

GP2000H-AP422 RS-422 GP2000H adapter

Proface GP2000H-AP422 Manual And Instructions
GP2000H-AP422 Operation Manual

Proface GP2000H-AP422 Product information and technical parameters:
Brand: Proface
Name: RS-422 GP2000H adapter
Model: GP2000H-AP422
For connecting GP operation data with RS-422 and power /DIO terminals.

For the man-machine interface hanging in the neck lanyard.Touch screen anti ultraviolet protective film (1 pieces).1-0 DVI standard (DVI-D 24 pin convex connector)4.3 Inch Touch Screen anti UV protective film (1 pieces).Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationUsed to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors GP2000H-AP422 GP2000H-AP422
Length: 10 meters. One end is a loose wire, which is used to carry out RS-485 connection between the host and LT.COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionUsed in a variety of host and man-machine interface for RS-232C connectionA1/A2/B+ DIO Type connector (compression type) (5 / set)For 3 GP2000H-AP422. 8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 5 meters. The main controller is connected to the man-machine interface for MPI communicationProtection for GP rear connectors (large and small for each of the 1) GP2000H-AP422. 2 / setsReplaceable anti fouling film for protecting screen protective film (5 sheets / cover).COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface.Used for surface protection of man-machine interface from oil and chemical pollution (5 / set).10.4 inches (TFT), the replacement of the host backlight (1).NETWORK FLEX 64 point DIO connector terminal block, (including 2)AUX connector for external outputt (5 / set) GP2000H-AP422. A1/A2/B+ DIO Type connector (welding type) (5 / set)Used to install the GP3000H series to a commercially available support arm or panel.The main controller is connected to the host computer interface (can be switched betweeen RS-232C and RS-422) using the isolation module GP2000H-AP422. To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)


...More relevant models >>>>