GP2000H-AP232 RS-232C GP2000H adapter

COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).COM2 adapter for converting the COM2 interface to the RS-422 terminal blockInterface module for the simultaneous use of A/QnA/FX series external controller7 GP2000H-AP232. 5 inches, GP installed to the hard panel to provide dust and moisture proof function GP2000H-AP232For 5.7 inch models, prevent cable loose from the USB cable fastening clip (5 / set).The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.COM2 terminal adapter for communication through the RS-422/485 connectionConnector for connecting DC power cord GP2000H-AP232. (linear, 5 / set)Used to prevent accidental operation. Includes 3 mounting screws.Transmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B).The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.Cable for connecting GP3000 to various modulesThe main controller is connected to the man-machine interface for MPI communicationOne end is a loose wire, which is used to carry out RS-232C connection between the host and LT GP2000H-AP232. The main controller is connected to the man-machine interface for MPI communicationUsed to connect the SIEMENS S5 PLC series to the host computer interfaceUSB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set).I/O module, including 32 point NPN/PNP inputTouch screen anti ultraviolet protective film (1 pieces).USB cable clamp for preventing disconnection of connection (5 / set)5 / setsTo prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)Memory for extending EX GP-Pro alarm and character table functions GP2000H-AP232. Portable GP2000H series models accessories, RS-232 single head cable (3 m).Apply to GLC-26000/2500Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)