Proface
Home >> Products >> Proface >> man-machine interface accessories >> GP3000H-CBLS-5M GP3000H no joint soft cable connection

GP3000H-CBLS-5M GP3000H no joint soft cable connection

Proface GP3000H-CBLS-5M Manual And Instructions
GP3000H-CBLS-5M User's Manual

Proface GP3000H-CBLS-5M Product information and technical parameters:
Brand: Proface
Name: GP3000H no joint soft cable connection
Model: GP3000H-CBLS-5M
Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 5 meters.

7.4 inches, replace the backlight (1 / set)Colorful LED switch with USB interface.Touch screen anti ultraviolet protective film (1 pieces).AUX connector for external output (5 / set).Converting 2 analog signals into digital signalsGP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panel512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card GP3000H-CBLS-5M GP3000H-CBLS-5M 12.1 inches, replaced by a host of backlight (1).Used to install the human machine interface to the fixed panel (2 / cover).Disposable supplies used to protect the screen from the pollution of the man-machine interface film (5 sheets / sets)Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter GP3000H-CBLS-5M.
Length of 10 meters. The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port.Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).SD memory card (4GB, MLC, CLASS4).For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set) GP3000H-CBLS-5M. The MITSUBISHI A series PLC is connected to GP, length: 5 m.For the DVI input to GP3000COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters.10.4 inches (TFT), thin film for surface protection of man-machine interface fromm fingerprints, water droplets, dust and oil pollution (5 / set) GP3000H-CBLS-5M. Touch screen anti ultraviolet protective film (1 pieces).Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.Inputt / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputSome types of PLC are not connected GP3000H-CBLS-5M. Length: 5 meters.


...More relevant models >>>>