Proface
Home >> Products >> Proface >> man-machine interface accessories >> GP3000-RGB201 RGB input module

GP3000-RGB201 RGB input module

Proface GP3000-RGB201 Manual And Instructions
GP3000-RGB201 User's Manual

Proface GP3000-RGB201 Product information and technical parameters:
Brand: Proface
Name: RGB input module
Model: GP3000-RGB201
Used to display analog RGB (2 channels) on the GP3000

Portable GP2000H series models accessories, RS-232 single head cable (3 m).7.5 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master station1-0 DVI standard (DVI-D 24 pin convex connector)Clock battery, save system date and time when power is off GP3000-RGB201 GP3000-RGB201 Used for surface protection of man-machine interface from oil and chemical pollution (5 / set).Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Use external output for the GP3000 series of auxiliary connectors (5 / sets).Used to install the GP3000H series to a commercially available support arm or panel GP3000-RGB201. (serial communication terminal adapter is included in the product package)5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card GP3000-RGB201. 12.1 inches, replace the backlight (1 / set)5.7 inches, replace the backlight (1 / set)The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.Touch screen anti ultraviolet protective film (1 pieces).A veneer, for the GP4000 series back loading models of full flush (white, 1)10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface GP3000-RGB201. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Provide dust proof and moistuure proof function when installing GP3000H conversion adapter to hard panel GP3000-RGB201. Portable GP2000H series models accessories, RS-232 single head cable (10 m).


...More relevant models >>>>