CA7-CBLCVRGB-01 DVI-RGB conversion cable

Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.Touch screen anti ultraviolet protective film (1 pieces).Durable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter.Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master station12 CA7-CBLCVRGB-01 CA7-CBLCVRGB-01 1 inches, replace the backlight (1 / set)10.4 inches or more, for the film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)I/O expansion module, including the 8 point relay /1 public endLT seal on the control panel.For thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Some types of PLC are not connected CA7-CBLCVRGB-01. Length: 5 meters.With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)LT4000M (module type analog), PNP output, DC24V (host).Provide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel CA7-CBLCVRGB-01. COM2 terminal adapter for communication through the RS-422/485 connectionUsed to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. Extended cable for connecting USB (Type-A) (LT) interface.Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected.Connect to PC, transfer screen data and user programs.CFast cards (32GB, SLC,) insserted in the CFast slot for storage CA7-CBLCVRGB-01. The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devvices CA7-CBLCVRGB-01. (5 / set)The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.