Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters).
The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function GP2000H-D232-10M. 10 GP2000H-D232-10M
4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).12.1 inches, replace the backlight (1 / set)For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block GP2000H-D232-10M. I/O expansion module, including the 8 point relay /1 public endLength: 5 meters.10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card GP2000H-D232-10M. Disposable battery (1 blocks) for backing up clock data.2 / sets5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Connector for connecting DC power cord. (right angle, 5 / set)COM1 interface with the cable for direct connection to the CPU series PLC AThe man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or otherr host)Apply to GLC-2600/2500COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connector10 GP2000H-D232-10M. 4 inches (TFT), the GP will be installed to the hard panel to provide dust and mmoisture proof function GP2000H-D232-10M. Durable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter.