GP2000H-C232-10M RS-232 single head cable

GP2500S useCable for connecting GP3000 to various modulesThe main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.Used to install the human machine interface to the fixed panel (2 / cover).A veneer, for the GP4000 series back loading models of full flush (white, 1)Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface GP2000H-C232-10M GP2000H-C232-10M Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceLT4000M (module type DIO), NPN output, DC24V (host) GP2000H-C232-10M. 15 inches, GP installed to the hard panel to provide dust and moisture proof function.Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. Engineering documents created by the LT interface to download images and logic programming software through the USB interface.Portable GP2000H series models accessories, RS-422 single head cable (10 m) GP2000H-C232-10M. Input / output hybrid I/O modules, including 32 point NPN/PNP input and 32 point NPN transistor outputDurable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter.Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. Cable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex).When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)13 pin input connectors for HTB and 16 pin output connectors GP2000H-C232-10M. (1 / set)Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters).The PC adapteer for PCMCIA slot read CF card required GP2000H-C232-10M. For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)