HTB1C0DM9LP CANopen slave station HTB module

USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set).Converting 2 analog signals into digital signalsGP3000H portable slingFor connecting GP operation data with D-Sub RS-232C and power /DIO terminals.Used to install the human machine interface to the fixed panel (2 / cover) HTB1C0DM9LP. Connector for connecting a serial port (1)The MITSUBISHI A series PLC is connected to GP, length: 5 m HTB1C0DM9LPThe MITSUBISHI Q series PLC is connected to GP, length: 5 m.Suitable for GLC2300 series10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters) HTB1C0DM9LP. Extension cable for connecting USB (Type-A) interface to front panel.Interface module for the simultaneous use of A/QnA/FX series external controllerTouch screen anti ultraviolet protective film (1 pieces).Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card HTB1C0DM9LP. 15 inches, GP installed to the hard panel to provide dust and moisture proof function.I/O module, including 32 point NPN/PNP input5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)A veneer, for the GP4000 series back loading models of full flush (white, 1)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)5.7 inches, GP installed to the hard paneel to provide dust and moisture proof function HTB1C0DM9LP. 10.4 inch screen protective cover (1 pieces)With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)COM1 interface with the cable ((RS-232C), used to connect directly to the SYSMAC connection module (or other host)Data transmission cable between host and LT series HTB1C0DM9LP. Length: 5 meters.