Proface
Home >> Products >> Proface >> man-machine interface accessories >> CA8-CANLT-01 CANopen master module

CA8-CANLT-01 CANopen master module

Proface CA8-CANLT-01 Manual And Instructions
CA8-CANLT-01 User's Manual

Proface CA8-CANLT-01 Product information and technical parameters:
Brand: Proface
Name: CANopen master module
Model: CA8-CANLT-01
Slave station module for connecting support for CANopen

The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port.Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 3 meters. Converting SIO to RS-422 terminal blockMounting screws (4 sets) to be fitted to the hard panel at the interface of the machine CA8-CANLT-01. Cable for connecting GP3000 to various modules12 CA8-CANLT-011 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function.When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).Extension cable for connecting USB (Mini-B) interface to front panel CA8-CANLT-01. With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)A1/A2/B+ DIO Type connector (welding type) (5 / set)For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Connector for connecting DC power cord (5)7.4 inches, replace the backlight (1 / set)Used for surface protection of man-machine interface from oil and chemical pollution (5 / set) CA8-CANLT-01. Suitable for LT4000M/GP4000M series modules, 5.7 inch. Used to output the image signal from the host computer to GPApplicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).For 5.7 inch models, for fixing the hooks of the three EX modules.For the DVI input to GP3000With a fixed screw of the pre USB protection ccover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set) CA8-CANLT-01. USB interface products: without the base of the tower lights, 3 sections, can be changed color and flashing display, the configurationn of the buzzer CA8-CANLT-01. Used to install the human machine interface to the fixed panel (2 / cover).10.4 inches (TFT), the replacement of the host backlight (1).


...More relevant models >>>>
Related model