Proface
Home >> Products >> Proface >> man-machine interface accessories >> CA6-DIOCN4-01 DIO connector

CA6-DIOCN4-01 DIO connector


Proface CA6-DIOCN4-01 Product information and technical parameters:
Brand: Proface
Name: DIO connector
Model: CA6-DIOCN4-01
For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)

10.4 inches or larger, when installed to provide the function of dust and moistureWhen the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)Apply to GLC-2600/2500Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationStop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces) CA6-DIOCN4-01 CA6-DIOCN4-01 Interface module for the simultaneous use of A/QnA/FX series external controllerThe man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.Cable for connecting GP3000 to various modulesAdapter for EX module (5 / set)Some types of PLC are not connected CA6-DIOCN4-01. Length: 5 meters.When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).Length: 3 metersUsed to output the image signal from the host computer to GPThe main controller is connected to the man-machine interface of the host, for MPI communicationFor connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block CA6-DIOCN4-01. Direct interface Matsushita Electric PLC FP series CPU port.Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputFor 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.Connector for connecting DC power cord (5 / seet) CA6-DIOCN4-01. 5.7 inches, replace the backlight (1 / set)COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)12.1 inches, replaced by a host of backlight (1) CA6-DIOCN4-01. Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).4.3 Inch Touch Screen anti UV protective film (1 pieces).


...More relevant models >>>>
Related download