PFXZCBCBML1 Multi-Link connecting cable (5 m)

256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.LT4000M (module type DIO), NPN output, DC24V (host).Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block PFXZCBCBML1. Used to output the image signal from the host computer to GPUSB interface products: without the base of the tower lights, 3 sections, can be changed color and flashing display, the configuration of the buzzer PFXZCBCBML1Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN transistor outputDurable cable for connecting GP3000H adapter and GP3000H.5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter PFXZCBCBML1.
Length of 3 meters. LT seal on the control panel.Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors PFXZCBCBML1.
Length: 10 meters. Touch screen anti ultraviolet protective film (1 pieces).12.1 inch screen protective cover (1 pieces)Touch screen anti ultraviolet protective film (1 pieces).2 / setsTouch screen anti ultraviolet protective film (1 pieces).For the operation screen (5 pieces) (GP3000H standard).2GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.COM1 interface with the cable for direct connection to the CPU series PLC AStop pin, prevent cable connection loose USB cable fastening clip (TType-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces) PFXZCBCBML1. Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support foor intelligent devices)For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters PFXZCBCBML1.