Proface
Home >> Products >> Proface >> man-machine interface accessories >> PFXZCBCBCVR41 RS-422C 9 pin /25 pin conversion cable (20 cm)

PFXZCBCBCVR41 RS-422C 9 pin /25 pin conversion cable (20 cm)


Proface PFXZCBCBCVR41 Product information and technical parameters:
Brand: Proface
Name: RS-422C 9 pin /25 pin conversion cable (20 cm)
Model: PFXZCBCBCVR41
Used for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave joint

Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters).Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).For the DVI input to GP3000NETWORK FLEX 64 point DIO connector terminal block, (including 2)To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)10 PFXZCBCBCVR41. 4 inch TFT models applicable parts, for the 10 PFXZCBCBCVR414 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.3.4 Inch Touch Screen anti UV protective film (1 pieces).2 / setsProtection for GP rear connectors (large and small for each of the 1).For RGB input USB cable to prevent disconnection (2 / set)Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) PFXZCBCBCVR41. The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable PFXZCBCBCVR41. (5 / set)Replaceable anti fouling film for protecting screen protective film (5 sheets / cover).For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.Length: 3 metersThe three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface.Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2Connect to PC, transfer screen data and user programs.10.4 inches (STN), the replacement of the host backlightt (2 / set) PFXZCBCBCVR41. COM2 adapter for converting the COM2 interface to the RS-422 terminal blockTouch screen anti ultraviolet protective film (1 pieces).Suitable for GLC2300 seriesFor the direct connection of the MITSUBISHI FX series CPU PLC (nnot to be used at the same time, the programmer) length: 5 meters PFXZCBCBCVR41. 15 inches, GP installed to the hard panel to provide dust and moisture proof function.


...More relevant models >>>>