PFXLM4B01DAK LT4000M (module type simulation)

GP2500S useUsed for surface protection of man-machine interface from oil and chemical pollution (5 / set).Disposable supplies used to protect the screen from the pollution of the man-machine interface film (5 sheets / sets)7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets) PFXLM4B01DAK. GP3000H replacement label (5 sheets / set)For RGB input USB cable to prevent disconnection (2 / set)GLC2300 is not available3 PFXLM4B01DAK8 inches, GP installed to the hard panel to provide dust and moisture proof function.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.SD memory card (4GB, MLC, CLASS4).Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) PFXLM4B01DAK. To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface).The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.10.4 inches and above, used to connect the power cord (5 / set) PFXLM4B01DAK. 7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes.5.7 inch screen protective cover (1 pieces)The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.CFast cards (32GB, SLC,) inserted in the CFast slot for storage.When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)The installation of accessories, adjust the size of tthe GP-411xT panel with the same size of the GP-410xG/W, easy to replace PFXLM4B01DAK. GP3000H portable slingExtension cable for connecting USB (Mini-B) interface to front panel.10.4 inches (TFT), the GP will be installed to the hard panel to providee dust and moisture proof function PFXLM4B01DAK. Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters.