Home
>> Products
>> Proface
>> man-machine interface accessories
>> CA3USBCB-01 Data transmission USB cable (2 m)
CA3USBCB-01 Data transmission USB cable (2 m)
Proface CA3USBCB-01 Product information and technical parameters：
Brand: Proface
Name: Data transmission USB cable (2 m)
Model: CA3USBCB-01
Engineering documents created by the LT interface to download images and logic programming software through the USB interface.
Converting SIO to RS-422 terminal blockWhen the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) CA3USBCB-01. Touch screen anti ultraviolet protective film (1 pieces).12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function CA3USBCB-0115 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different.The installation of accessories, adjust the size of the GP-411xT panel with the same size of the GP-410xG/W, easy to replace CA3USBCB-01. Extension cable for connecting USB (Type-A) interface to front panel.Touch screen anti ultraviolet protective film (1 pieces).LT4000M (module type analog), PNP output, DC24V (host).Standard cable for connecting GP3000H adapter and GP3000H.
Length: 3 meters. Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface) CA3USBCB-01. When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).Cable for connecting GP3000 to various modulesCOM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)Length: 5 meters.Connector for connecting DC power cord (5)Suitable for LT4000M/GP4000M series modules, 3.5 inch.5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil polllution (5 / set)Touch screen anti ultraviolet protective film (1 pieces) CA3USBCB-01. GP2500S use7.4 inches, installed to provide the function of dust and moistureThe main controller is connected to the host computer interface (can be switched betweeen RS-232C and RS-422) using the isolation module CA3USBCB-01. Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor output
Length: 3 meters. Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface) CA3USBCB-01. When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).Cable for connecting GP3000 to various modulesCOM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)Length: 5 meters.Connector for connecting DC power cord (5)Suitable for LT4000M/GP4000M series modules, 3.5 inch.5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil polllution (5 / set)Touch screen anti ultraviolet protective film (1 pieces) CA3USBCB-01. GP2500S use7.4 inches, installed to provide the function of dust and moistureThe main controller is connected to the host computer interface (can be switched betweeen RS-232C and RS-422) using the isolation module CA3USBCB-01. Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor output
...More relevant models >>>>
Last one: Proface RS-485 RJ45 cable (5 m) PFXZLMCBRJR81
next one: Proface The front panel of the USB extension line (USB Type-A) (1 meters) CA5USBEXT-01
Related download
Related model