PFXLM4B01DAC LT4000M (module type simulation)

Touch screen anti ultraviolet protective film (1 pieces).Suitable for GLC2300 seriesThe man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. 128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card PFXLM4B01DAC PFXLM4B01DAC Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output. AUX connector, L typeUsed to prevent disconnection of the connection (1 interface, 5 / set) PFXLM4B01DAC. Direct interface Matsushita Electric PLC FP series CPU port.Memory for extending EX GP-Pro alarm and character table functions.The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.Adapter for EX module (5 / set)12.1 inches, replaced by a host of backlight (1).A1/A2/B+ DIO Type connector (compression type) (5 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceStandard cable for connecting GP3000H adapter and GP3000H PFXLM4B01DAC.
Length: 5 meters. To prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.For RGB input USB cable to prevent disconnection (2 / set)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Touch panel operation for RGB input modules (Master - from: Mini-B)For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.Used for surface protection of man-machine interface from oil and chemical pollution (5 / set) PFXLM4B01DAC. Digital small keyboard with USB interface.For the man-machine interface hanging in the neck lanyard.The module is used for mounting on the back board of the GLC2000 series host computer PFXLM4B01DAC. Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side.