Some types of PLC are not connected. Length: 5 meters.
GP4000 series back mounted model of waterproof rubber gasket. (1)CFast cards (32GB, SLC,) inserted in the CFast slot for storage.Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 3 meters. Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters) GP410-IS00-O. 10.4 inches (STN), the replacement of the host backlight (2 / set) GP410-IS00-O
Transmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B).When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).Data transmission cable between host and LT series GP410-IS00-O. Length: 5 meters.When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Replaceable anti fouling film for protecting screen protective film (5 sheets / cover).I/O module, including 32 point NPN/PNP inputFor connecting GP operation data with RS-422 and power /DIO terminals.7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output GP410-IS00-O. AUX connector, L typeExpansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationThe man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port.Slave station module for connecting support for CANopenI/O expansion module, including the 8 point relay /1 public endExtended cable for connecting USB (Type-A) (LT) interface.Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. Suitable for A/B+ Type modelsApplicable to GLC-2600//2500, the need for bus converter (PSL-CONV00) GP410-IS00-O. 5.7 inches, installed to provide the function of dust and moisture7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes.15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1) GP410-IS00-O. Note: joints A and B are different, the joints C and D different.