Proface
Home >> Products >> Proface >> man-machine interface accessories >> GP077-CL11 CC-Link intelligent equipment station module

GP077-CL11 CC-Link intelligent equipment station module


Proface GP077-CL11 Product information and technical parameters:
Brand: Proface
Name: CC-Link intelligent equipment station module
Model: GP077-CL11
Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).

Used in a variety of host and man-machine interface for RS-232C connectionTouch screen anti ultraviolet protective film (1 pieces).15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different.128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card GP077-CL11 GP077-CL11 For thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)Provide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel GP077-CL11. 10.4 inches or more, for the film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Connector for connecting DC power cord. (linear, 5 / set)For multi connection communication, length: 5 meters.The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port GP077-CL11. COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceLength: 5 meters.Cable for connecting GP3000 to various modules10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.5.7 inch screen protective cover (1 pieces)Adapter for EX module (5 / set)For the man-machine interface hanging in the neck lanyard.Touch screen anti ultraviolet protective film (1 pieces).The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port GP077-CL11. The module is used for mounting on the back board of the GLC2000 series host computer. Then you can install the GP77R series or GLC100 series of medium size exxpansion module in the module on the outward side GP077-CL11. 5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).


...More relevant models >>>>
Related download