ZC9USCL1 USB cable fastener (Type-A) (1 interface)

7.4 inches, installed to provide the function of dust and moistureDirect interface Matsushita Electric PLC FP series CPU port.LT4000M (module type DIO), PNP output, DC24V (host).For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters ZC9USCL1. The main controller is connected to the man-machine interface for MPI communication10 ZC9USCL14 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.The three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface ZC9USCL1. The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter ZC9USCL1.
Length of 3 meters. Connect to USB printer (Type-B).For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)Used for surface protection of man-machine interface from oil and chemical pollution (5 / set).5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).Stop pin, prevent cable connnection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces) ZC9USCL1. 5.7 inches thin film used for surface protection of man-machine interface from fingerpprints, water droplets, dust and oil pollution (5 / set)A1/A2/B+ DIO Type connector (welding type) (5 / set)12 ZC9USCL1. 1 inch screen protective cover (1 pieces)