PFXZGPRTC1 RTC battery pack

LT4000M (module type analog), PNP output, DC24V (host).A connector that connects the DIO interface for connecting an external I/O device (5 sets).Memory for extending EX GP-Pro alarm and character table functions.Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceOne end is a loose wire, which is used to carry out RS-232C connection between the host and LT PFXZGPRTC1 PFXZGPRTC1 Data transmission cable between host and LT series. Length: 5 meters.USB cable to prevent disconnection of the fastening clip (5 / set)COM2 adapter for converting the COM2 interface to the RS-422 terminal blockTouch screen anti ultraviolet protective film (1 pieces).Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface PFXZGPRTC1. For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Length: 5 meters.To prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)Suitable for LT4000M/GP4000M series modules, 3.5 inch.With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models PFXZGPRTC1. (2 / set)One end is a loose wire, which is used to carry out RS-485 connection between the host and LT.When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.Transmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B).When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set) PFXZGPRTC1. For connecting the GP3000H cable connector andd the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block PFXZGPRTC1.