Proface
Home >> Products >> Proface >> man-machine interface accessories >> PFXZCFUV61 5.7 inch UV protective film

PFXZCFUV61 5.7 inch UV protective film


Proface PFXZCFUV61 Product information and technical parameters:
Brand: Proface
Name: 5.7 inch UV protective film
Model: PFXZCFUV61
Touch screen anti ultraviolet protective film (1 pieces).

Used to prevent disconnection. (1 interface, 5 / set)COM1 interface with the cable for direct connection to the CPU series PLC A10.4 inches or more, for the film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Cable for connecting GP3000 to various modulesConnect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM215 inches, replaced by a host of backlight (1) PFXZCFUV61 PFXZCFUV61 The three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface.LT seal on the control panel.5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set) PFXZCFUV61. Cable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex).Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceOMRON SYSMAC series PLC or other main controller) connected to GP, length: 5 m.Touch screen anti ultraviolet protective film (1 pieces) PFXZCFUV61. With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set).10.4 inches (STN), the replacement of the host backlight (2 / set).The installation of accessories, adjust the size of the GP-411xT panel with the same size of the GP-410xG/W, easy to replace.Interface module for the simultaneous use of A/QnA/FX series external controllerFor the operation screen (5 pieces) (GP3000H standard).Suitable for LT4000M/GP4000M series modules, 3 PFXZCFUV61. 5 inch.When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionCOM1 interface withh the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)4 PFXZCFUV61. 3 Inch Touch Screen anti UV protective film (1 pieces).


...More relevant models >>>>