PFXZCETWHA1 EZ series lamp (with base)

COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connectorAdapter for converting an audio output portion of a AUX adapter into a Jack Pin socket.Input / output hybrid I/O modules, including 32 point NPN/PNP input and 32 point NPN transistor outputSuitable for A/B+ Type modelsWith the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models PFXZCETWHA1 PFXZCETWHA1 (2 / set)Touch screen anti ultraviolet protective film (1 pieces).Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationUsed for surface protection of man-machine interface from oil and chemical pollution (5 / set) PFXZCETWHA1. 7.5 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).3.8 inches, GP installed to the hard panel to provide dust and moisture proof function.Extension cable for connecting USB (Type-A) interface to front panel.(serial communication terminal adapter is included in the product package)Cable for connecting GP3000 to various modulesUsed to output the image signal from the host computer to GPFor connecting GP operation data with D-Sub RS-232C and power /DIO terminals PFXZCETWHA1. When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)A veneer, for the GP4000 series back loading models of full flush (white, 1)For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)For RGB input USB cable to prevent disconnection (2 / set)Data transmission cable between host and LT seriees PFXZCETWHA1. Length: 5 meters.Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface).The main controller is connected to the man-machine interface of the host, for MPI communicationApply to GLLC-2600/2500COM1 interface with the cable for direct connection to the CPU series PLC QFor the elastic display module installation nut wrench (1 / set) PFXZCETWHA1.