Proface Proface CA6-DNSALL/EX-01 Price

COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)Type: there is an emergency stop switch (red) and a key switch.
Display type: TFT color LCD.
Display size: 5.7 inch.
Display color: 65536 color (no flicker), 16384 color (flashing).
Resolution (pixel) x:640 480 (VGA).
Memory: 32MB.
Data backup: 320KB SRAM.
Emergency stop switch provides 3 colors of red, yellow and grey CA6-DNSALL/EX-01
3 position enable switch with forced contact disconnect function.
Key switch without pressing the emergency stop switch can also be mobile devices.
Very light.
The high visibility of the configuration of the 65536 color TFT color LCD.
High definition and wide viewing angle to bring excellent visual effects.
Easily replace GP3000H series.When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)GP4000E series entry-level programmable man-machine interface.
Screen size: 7 inch widescreen.
Display type: TFT color LCD.
Resolution: 800 x 480 pixels (WVGA).
Display color number: 65536 color.
Backlight: LED.
Internal memory: EPROM FLASH 32 MB.
Backup memory: EPROM FLASH 128 KB.
Interface: RS-232C, RS-422/485, Ethernet, USB.
Voltage: DC24V.
More humanized design.
USB1 (A Type) on the lock and prevent the U disk to drop the lock screw.
Sliding type battery cabin, so that more convenient to replace the battery.
3 communication interface (1 network port, serial port 2), not only can be directly connected with the PLC,
And can be directly connected with other controllers (SCM, thermostat),
Helps to reduce the cost of the modules to be added after connecting these controllers with PLC.
Take time for the bad production environment
Low power consumption, no heat sink holes, effectively reduce dust and water vapor intrusion.
PCBA reinforced coating process (fully automatic mechanical coating),
Farewell to the use of dust, humidity and other harsh environment concerns.
Easy to direct.
GP4000E full range of standard Ethernet, can be connected to a variety of industrial controller,
Such as PLC, motion controller, robot, vision sensor, etc..
Expanding business.
All hardware can be used to create the required EX GP-Pro screen.
All hardware equipment using the same development platform, is conducive to the development of new business.
Reduce the burden of CPU PLC.
GP4000E series can use internal logic programming function (ladder diagram programming) to reduce the burden of CPU PLC.
CA6-DNSALL/EX-01 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=CA6-DNSALL/EX-01&select=5