3 / setsDIO model /PNP output type.
Display size: 3.5 inches.
Resolution: 320 x 240 pixels (QVGA).
Color: 65536 color.
Ethernet interface: 1.
Serial port: 1.
CANopen interface: 1.
Built in DIO input: 20 points.
Built in DIO output: 10 points.
Built in AIO input: No PS600-BU00 Instruction Sheet.
Built in AIO output: No.
Common DIO:2 point high speed counter (with synchronous output) pulse capture input PS600-BU00
Dedicated DIO:2 point pulse output, PWM output.
Expansion module EX module: none.
Expansion module CANopen module: 63 stations.
Controller memory size: EPROM 132KB FLASH (equivalent to 15000 steps (up to 60000 steps).
Remote HMI Pro-face.
Natural connection production line and tablet PC or smart phone PS600-BU00 Instruction Sheet. By adding APP,
True implementation of mobile operations without loss of any operational performance.
Directly confirm the cause of the failure of the phone, as far as possible not to the scene on the recovery of the machine running.
LT4000M supports data exchange with a variety of remote devices through the CANopen, easy to achieve economic and easy to use system design PS600-BU00 Instruction Sheet.
Can choose standard I/O module, also can choose action or control module and other more advanced products in complex application.
The volume is small but the display is fresh and bright, can create a rich and readable operation picture.
The control function of the whole and the digital I/O, analog I/O, analog temperature input and USB, serial port and Ethernet communication interface.
Adopt integrative design, compact structure,
When the installation is only required to open a hole in the panel 222mm PS600-BU00 Manual.
The display module or the control module can be easily replaced when the fault is eliminated.
The control module can be installed on the DIN guide rail by using the split installation cable,
And the dissplay module is installed in other locations PS600-BU00 Manual.
Display module occupies a small space, even if the space is limited, but also can be flexible to install.