Proface
Home >> Products >> Proface >> man-machine interface accessories >> PS400-BU00-MS Backlight

PS400-BU00-MS Backlight

Proface PS400-BU00-MS Manual And Instructions
PS400-BU00-MS Instruction Sheet

Proface PS400-BU00-MS Product information and technical parameters:
Brand: Proface
Name: Backlight
Model: PS400-BU00-MS
7.4 inches, replace the backlight (1 / set)

A veneer, for the GP4000 series back loading models of full flush (white, 1)USB cable to prevent disconnection of the fastening clip (5 / set)Protection for GP rear connectors (large and small for each of the 1).When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function PS400-BU00-MS. (1)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface12 PS400-BU00-MS1 inch screen protective cover (1 pieces)The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication PS400-BU00-MS. Slave station module for connecting support for CANopenExpansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationLT4000M (module type DIO), NPN output, DC24V (host).For multi connection communication, length: 5 meters.256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card PS400-BU00-MS. Transmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B).With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets).Cable for connecting GP3000 to various modulesFor connecting GP operation data with D-Sub RS-232C and power //DIO terminals PS400-BU00-MS. Portable GP2000H series models accessories, RS-422 single head cable (3 m).GP3000H replacement label (5 sheets / set)Touch screen anti ultraviolet protective film (1 pieces).For connecting the GP3000H cable connector andd the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block PS400-BU00-MS.


...More relevant models >>>>