ZC9CBFP21 FP PLC series CPU connecting cable (2 m)

7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets).Touch screen anti ultraviolet protective film (1 pieces).5.7 inches, replace the backlight (1 / set)With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set) ZC9CBFP21. Used to install the human machine interface to the fixed panel (2 / cover) ZC9CBFP21Touch screen anti ultraviolet protective film (1 pieces).The main controller is connected to the man-machine interface for MPI communicationTo prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)LT4000M (module type DIO), NPN output, DC24V (host).Connector for connecting DC power cord ZC9CBFP21. (right angle, 5 / set)Clock battery, save system date and time when power is off.Length: 3 metersCOM1 interface with the cable for direct connection to the CPU series PLC ASlave station module for connecting support for CANopenOne end is a loose wire, which is used to carry out RS-232C connection between the host and LT.The main controller is connected to the man-machine interface for MPI communicationCable for connecting GP3000 to various modules3 ZC9CBFP21. 5 inch screen protective cover (1 pieces)2GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationTransmission screen data, suchh as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication ZC9CBFP21. 10.4 inches (TFT), the reeplacement of the host backlight (1) ZC9CBFP21. With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)