PFXZCDOP101 10 inch environmental protection cover

12.1 inches, replaced by a host of backlight (1).12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Expansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communication5 PFXZCDOP101. 7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)For 3 PFXZCDOP1018 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port.The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication PFXZCDOP101. When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).5.7 inch screen protective cover (1 pieces)GP3000H replacement label (5 sheets / set)12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function PFXZCDOP101. Standard cable for connecting GP3000H adapter and GP3000H.
Length: 10 meters. Adapter for EX module (5 / set)12.1 inch screen protective cover (1 pieces)The nut for mounting the display module (10 / set).Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected.Disposable supplies used to protect the screen from the pollution of the man-machine interface film (5 sheets / sets)Length: 5 meters.LT4000M (module type DIO), PNP output, DC24V (host).Fitting on NETWORK FLEX iinterface PFXZCDOP101. Connecting NETWORK FLEX communication cable. (5 / set)10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1) PFXZCDOP101. Note: joints A and B are different, the joints C and D different.