GP2000H-DF10 Screen protection film

Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 5 meters. When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).I/O expansion module, including the 8 point relay /1 public end12 GP2000H-DF10. 1 inches, replace the backlight (1 / set)Used to prevent disconnection of the connection (1 interface, 5 / set) GP2000H-DF10For the elastic display module installation nut wrench (1 / set).For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters).10.4 inches or larger, when installed to provide the function of dust and moistureUsed to prevent accidental operation GP2000H-DF10. Includes 3 mounting screws.COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface.For thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Used in a variety of host and man-machine interface for RS-232C connectionDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface GP2000H-DF10. Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connectorProvide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel.The main controller is connected to the man-machine interface of the host, for MPI communicationA1/A2/B+ DIO Type connector (ccompression type) (5 / set)15 inches, replaced by a host of backlight (1) GP2000H-DF10. LT4000M (module type DIO), PNP output, DC24V (host).10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set).CCable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex) GP2000H-DF10.