GP070-AT01 Mounting screw

Extension cable for connecting USB (Type-A) interface to front panel.Interface module for the simultaneous use of A/QnA/FX series external controllerDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceSD memory card (4GB, MLC, CLASS4) GP070-AT01 GP070-AT01 Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets).5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Used to install the human machine interface to the fixed panel (2 / cover) GP070-AT01. For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.Touch screen anti ultraviolet protective film (1 pieces).10.4 inches (STN), the replacement of the host backlight (2 / set) GP070-AT01. With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)GP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panelStandard cable for connecting GP3000H adapter and GP3000H.
Length: 10 meters. Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected.Used to prevent accidental operation. IIncludes 3 mounting screws GP070-AT01. Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters).7.0/7.5 inch screen protective cover (1 pieces)Length: 5 meters.The module is used for mounting on the back board of the GLC2000 series host computer GP070-AT01. Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side.