CA5-DCCNL-01 DC power adapter

One end is a loose wire, which is used to carry out RS-485 connection between the host and LT.I/O expansion module, including the 8 point relay /1 public endLength: 3 metersLT fasteners installed on the control panel (4 / set)The Video-Mix module (262000 color video input, 4 channel x, DVI input DVI output x 1 channel, 1 channel x, VGA/SVGA/XGA) *1The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication CA5-DCCNL-01 CA5-DCCNL-01 The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.2 / setsUsed for surface protection of man-machine interface from oil and chemical pollution (5 / set) CA5-DCCNL-01. Memory for extending EX GP-Pro alarm and character table functions.5.7 inches, GP installed to the hard panel to provide dust and moisture proof function.4.3 Inch Touch Screen anti UV protective film (1 pieces).Data transmission cable between host and LT series. Length: 5 meters.7.4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)7.0/7.5 inch screen protective cover (1 pieces)Adapter for EX module (5 / set)10 CA5-DCCNL-01. 4 inches (TFT), the replacement of the host backlight (1).12.1 inches, replaced by a host of backlight (1).Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceInput / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputTouch screen anti ultraviolet protective film (1 pieces).Used to prevent accidental operation. Includes 3 mounting screws.Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters).Used to connect the GP2000H series RS-232C conversion adapter wiith GP3000H, with D-Sub connectors CA5-DCCNL-01.
Length: 10 meters. For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.Converting 4 analog signals into digital signalsThe main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail CA5-DCCNL-01.