Proface
Home >> Products >> Proface >> man-machine interface accessories >> CA3-MDCB11 MITSUBISHI 2-Port PLC adapter II cable (5 m)

CA3-MDCB11 MITSUBISHI 2-Port PLC adapter II cable (5 m)


Proface CA3-MDCB11 Product information and technical parameters:
Brand: Proface
Name: MITSUBISHI 2-Port PLC adapter II cable (5 m)
Model: CA3-MDCB11
COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interface

Used to convert the USB interface to the serial interface (RS-232C). A modem or bar code reader that can be connected to support RS-232C.Touch screen anti ultraviolet protective film (1 pieces).Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.For 5 CA3-MDCB11. 7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening CA3-MDCB11The installation of accessories, adjust the size of the GP-411xT panel with the same size of the GP-410xG/W, easy to replace.Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected CA3-MDCB11. Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.Touch screen anti ultraviolet protective film (1 pieces).One end is a loose wire, which is used to carry out RS-485 connection between the host and LT.For the man-machine interface hanging in the neck lanyard CA3-MDCB11. 512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Used to connect the 2-Port adapter to GP4000Converting SIO to RS-422 terminal blockDurable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter.LT4000M (module type analog), PNP output, DC24V (host).Slave station module for connecting support for CANopenDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceGP3000H replacement label (5 shheets / set)Used to connect the SIEMENS S5 PLC series to the host computer interfaceA veneer, for the GP4000 series back loading models of full flush (white, 1)12 CA3-MDCB11. 1 inch screen protective cover (1 pieces)3.5 inch screen protective cover ((1 pieces)7 CA3-MDCB11. 5 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).


...More relevant models >>>>
Related download