Proface Proface PFXGP4603TAD Price

Length: 3 meters3 / setsTransmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)Extension cable for connecting USB (Type-A) interface to front panel.5.7 inches, installed to provide the function of dust and moistureFor the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters PFXGP4603TAD10.4 inches (TFT), the replacement of the host backlight (1).GP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panelConverting 4 analog signals into digital signalsThe MITSUBISHI Q series PLC is connected to GP, length: 5 m.Output points: 2 points.
Rated output voltage range: voltage output: -10 to +10V.
Resolution: 11 bit (+ symbol). 12 way 4 digital signals into analog signals and output resultsDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.Replaceable anti fouling film for protecting screen protective film (5 sheets / cover).When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Input points: 2 points.
External connection: 11 pin terminal connector
Input type: voltage input: DC0 to 10V, current input: DC4 to 20mA.
Resolution: 12.
Output points: 1 points.
Rated output voltage range: voltage output: 0 to 10V, current input: 4 to 20mA.
Resolution: 12. 10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set).PNP output type.
Display size: 5.7 inches.
Resolution: 320 x 240 pixels (QVGA).
LCD: monochrome.
Color: 16 levels of gray.
Ethernet interface: 1.
Serial port: 1.
CANopen interface: No.
USB (host):1.
USB (device): none.
Built in DIO input: 16 points.
Built in DIO output: 16 points.
Built in AIO input: No.
Built in AIO output: No.
Common DIO:2 point high speed counter (with synchronous output) pulse capture input, pulse output, PWM output.
Special DIO: No.
Expansion module EX module: up to 3.
Expansion module CANopen module: 63 stations.
Controller memory size: EPROM 132KB FLASH (equivalent to 15000 steps (up to 60000 steps).
In order to meet the needs of users for small control devices, Pro-face integrated control and operation functions in the human computer interface.
In short, is to indicate the lights, instruments and other display devices and switches, buttons and other operational functions to integrate into a compact PLC.
In addition to reducing wiring and saving space, the design also greatly reduces the use of electrical components,
Which ensures the long service life of the equipment.
The compact models are equipped with standard I/O, and they can be used as a special I/O.
High / low pulse with maximum 100kHz and maximum 65kHz of the high speed counter can be achieved by the advanced control.
Strong I/O interface not only supports the need to switch and indicator light equipment, but also supports the need for sophisticated positioning of complex equipment.
CANopen network
LT4000M supports data exchange with a variety of remote devices through the CANopen, easy to achieve economic and easy to use system design.
Can choose standard I/O module, also can choose action or control module and other more advanced products in complex application.
Use EX GP-Pro to easily test and debug the project.
EX GP-Pro simulation is a kind of offline simulation function, with the help of this function,
No need to connect the man-machine interface, you can test the operation of the screen and the logic program.
Compact size.
The volume is small but the display is fresh and bright, can create a rich and readable operation picture.
The control function of the whole and the digital I/O, analog I/O, analog temperature input and USB, serial port and Ethernet communication interface.
Integrated design.
Adopt integrative design, compact structure,
When the installation is only required to open a hole in the panel 22mm.
The display module or the control module can be easily replaced when the fault is eliminated.
Using remote monitoring software GP-Viewer or data acquisition software EX Pro-Server,
Can easily monitor the production scene of the man-machine interface screen, or release production orders and real-time data collection.
Flexible installation.
The control module can be installed on the DIN guide rail by using the split installation cable,
And the display module is installed in other locations.
Display module occupies a small space, even if the space is limited, but also can be flexible to install.
Connect various control devices.
Pro-face human machine interface can be connected to a variety of industrial controllers, including PLC, motion controller, robot and other equipment.
Remote HMI Pro-face.
Natural connection production line and tablet PC or smart phone. By adding APP,
True implementation of mobile operations without loss of any operational performance.
Directly confirm the cause of the failure of the phone, as far as possible not to the scene on the recovery of the machine running.
PFXGP4603TAD Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=PFXGP4603TAD&select=5