PFXGP4501TAAC PDF datasheet (datasheet)

When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block.GP4000E series entry-level programmable man-machine interface.
Screen size: 7 inch widescreen PFXGP4501TAAC PDF datasheet.
Display type: TFT color LCD.
Resolution: 800 x 480 pixels (WVGA) PFXGP4501TAAC
Display color number: 65536 color.
Backlight: LED.
Internal memory: EPROM FLASH 32 MB.
Backup memory: EPROM FLASH 128 KB.
Interface: RS-232C, RS-422/485, Ethernet, USB.
Voltage: DC24V.
More humanized design.
USB1 (A Type) on the lock and prevent the U disk to drop the lock screw.
Sliding type battery cabin, so that more convenient to replace the battery PFXGP4501TAAC PDF datasheet.
3 communication interface (1 network port, serial port 2), not only can be directly connected with the PLC,
And can be directly connected with other controllers (SCM, thermostat),
Helps to reduce the cost of the modules to be added after connecting these controllers with PLC.
Take time for the bad production environment
Low power consumption, no heat sink holes, effectively reduce dust and water vapor intrusion PFXGP4501TAAC PDF datasheet.
PCBA reinforced coating process (fully automatic mechanical coating),
Farewell to the use of dust, humidity and other harsh environment concerns.
Easy to direct.
GP4000E full range of standard Ethernet, can be connected to a variety of industrial controller,
Such as PLC, motion controller, robot, vision sensor, etc..
Expanding business.
All hardware can be used to create the required EX GP-Pro screen.
All hardware equipment using the same development platform, is conducive to the development of new business.
Reduce the burden of CPU PLC.
GP4000E series can use internal logic programming function (ladder diagram programming) to reduce the burden of CPU PLC.DIO model /NPN output type.
Display size: 5.7 inches.
Resolution: 320 x 240 pixels (QVGA).
LCD:TFT.
Color: 65536 color.
Ethernet interface: 1.
Serial port: 1.
CANopen interface: 1.
USB (host):1.
USB (equipment):1.
Built in DIO input: 20 points.
Built in DIO output: 10 points.
Built in AIO input: No.
Built in AIO output: No.
Common DIO:2 point high speed counter (with synchronous output) pulse capture input.
Dedicated DIO:2 point pulse output, PWM output.
Expansion module EX module: none.
Expansion module CANopen module: 63 stations.
Controller memory size: EPROM 132KB FLASH (equivalent to 15000 steps (up to 60000 steps).
Flexible installation.
The control module can be installed on the DIN guide rail by using the split installation cable,
And the display module is installed in other locations.
Display module occupies a small space, even if the space is limited, but also can be flexible to install.
Compact size.
The volume is small but the display is fresh and bright, can create a rich and readable operation picture.
The contrrol function of the whole and the digital I/O, analog I/O, analog temperature input and USB, serial port and Ethernet communication interface PFXGP4501TAAC PDF catalog.
Integrated design.
Adopt integrative design, compact structure,
When the installlation is only required to open a hole in the panel 22mm PFXGP4501TAAC PDF catalog.
The display module or the control module can be easily replaced when the fault is eliminated.